User Tools

Site Tools


set_id

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

set_id [2016/01/25 17:26]
k0kad created
set_id [2016/01/25 20:15] (current)
k0kad Page Reformat
Line 6: Line 6:
   pico  /​home/​irlp/​custom/​environment   pico  /​home/​irlp/​custom/​environment
    
-You can also edit this file from the IRLP Remote ​Ad +You can also edit this file from the IRLP Remote ​Admin system. 
-min system.  +The variables which can be edited include: 
-The variables which can be edited include:  +  ​* ​USE_INTERVAL_ID ​ - Turns the ID system ON or OFF (YES or NO)  
-USE_INTERVAL_ID ​ +  ​* ​VOICE_ID_FILE ​ - Voice ID wav file that is played if it exists. To make the system play the voice ID file, just place the selected file onto the node.  
-   Turns the ID system ON or OFF (YES or NO)  +  ​* ​ID_PTT ​  Selects whether the PTT or AUX1 is used as a keying ​pin. For PiRLP this should be kept as AUX1.  
-VOICE_ID_FILE ​ +  ​* ​ID_INTERVAL ​  Required ID interval in seconds (10 min = 600)  
-   Voice ID wav file that is played if it exists. To +  ​* ​ID_MIX ​  Mixes the ID with regular node audio. For PiRLP nodes this should be set to YES.  
- make the system play the  +  ​* ​MORSE_TEXT ​  The morse text that is played for the ID. By default ​this is set to the callsign defined earlier in the file. Be sure to enclose ​the text you want played in quotes.  
-voice ID file, just place the selected file onto th +  ​* ​MORSE_SPEED ​  Options are SLOW (5wpm), MEDIUM (8wpm), FAST (15wpm), FASTEST (30wpm)  
-node.  +  ​* ​MORSE_PITCH ​  Frequency in Hz that the morse is played at (300-3000)  
-ID_PTT ​ +  ​* ​MORSE_VOLUME ​  % volume that the morse is played at (1-100) ​
-   Selects whether the PTT or AUX1 is used as a keyi +
-ng pin. For PiRLP this  +
-should be kept as AUX1.  +
-ID_INTERVAL ​ +
-   Required ID interval in seconds (10 min = 600)  +
-ID_MIX ​ +
-   Mixes the ID with regular node audio. For PiRLP +
-odes this should be set  +
-to YES.  +
-MORSE_TEXT ​ +
-   The morse text that is played for the ID. By defa +
-ult this is set to the  +
-callsign defined earlier in the file. Be sure to en +
-close the text you want  +
-played in quotes.  +
-MORSE_SPEED ​ +
-   Options are SLOW (5wpm), MEDIUM (8wpm), FAST (15w +
-pm),   +
-FASTEST (30wpm)  +
-MORSE_PITCH ​ +
-   Frequency in Hz that the morse is played at (300- +
-3000)  +
-MORSE_VOLUME ​ +
-   % volume that the morse is played at (1-100) ​+
set_id.txt · Last modified: 2016/01/25 20:15 by k0kad