Internet Radio Linking Project (IRLP) Wiki

start - [Links]

ve7ltd (ve7ltd@undisclosed.example.com) — 2018-06-04T04:51:57+00:00

IRLP - Internet Radio Linking Project Keeping the Radio in Amateur Radio This is a wiki page for IRLP. It relies on user submissions, so please have a look through, and feel free to contribute. ATTENTION NEW USERS - Due to a large amount of SPAM, I have had to close and control the editing of the wiki. In order to join and contribute, please set up and account, and use your callsign or node number as your username. That way I can manually approve you to the user list that is allowed to modi…

pirlp

ve7ltd (ve7ltd@undisclosed.example.com) — 2018-05-17T18:45:15+00:00

PiRLP is the marrying of two technologies - The Raspberry Pi and IRLP. Installing PiRLP (Dave's Updated Instructions 1/25/16) Problems with USB Keyboards After PiRLP Install Compatible USB Sound Cards Powering your Pi Ordering PiRLP parts or complete kit

changing_reflector_timeout

ve7ltd (ve7ltd@undisclosed.example.com) — 2018-05-17T18:06:42+00:00

On a specific reflector: Add a special entry into the file /home/irlp/custom/custom_decode, which adds the “notimeout” flag to the call. The line would look like this: if [ “${1}” = “9198” ] ; then ${SCRIPT}/connect_to_reflector ref9198 notimeout ; exit 1 ; fi

installing_pirlp - [Prerequisites and Disclaimer]

k0kad (k0kad@undisclosed.example.com) — 2016-01-26T05:29:02+00:00

Re-installing IRLP on a Raspberry Pi This article describes the steps required to re-install IRLP and Debian onto a Raspberry Pi computer from an existing IRLP node. If you would like a ready-built and configured system, consider ordering one direct from IRLP at

reinstall_no_backup - created

k0kad (k0kad@undisclosed.example.com) — 2016-01-26T05:18:03+00:00

Performing a Re-Install WITHOUT a Backup If you want to retain your node number then this will be a bit more tricky in that you have to have a backup in order to have the “PGP Keys” that were generated at the time the original node number was assigned. So the IRLP Installs team will need to be directly involved.

set_id - Page Reformat

k0kad (k0kad@undisclosed.example.com) — 2016-01-26T04:15:35+00:00

Configuring the Identifier (Morse/Voice) All IRLP nodes are programmed with a morse code / voice ID system by default. The configuration of the ID (known as Interval_id) is contained within the node environment file. You can edit the “environment

w32di-write.jpg - created

k0kad (k0kad@undisclosed.example.com) — 2013-04-02T05:01:14+00:00

w32di-blue_folder.jpg - created

k0kad (k0kad@undisclosed.example.com) — 2013-04-02T05:01:14+00:00

w32di.jpg - created

k0kad (k0kad@undisclosed.example.com) — 2013-04-02T04:06:37+00:00

raspberrypi_to_irlp_interface_schematic.pdf - created

ve7ltd (ve7ltd@undisclosed.example.com) — 2013-04-01T15:31:33+00:00

syba-sd-aud20066.jpg - created

Anonymous (anonymous@undisclosed.example.com) — 2013-01-31T18:08:48+00:00

gpio-srm.png - created

Anonymous (anonymous@undisclosed.example.com) — 2013-01-31T17:53:03+00:00

uri.jpg - created

Anonymous (anonymous@undisclosed.example.com) — 2013-01-21T22:32:44+00:00

syba-sd-cm-aud.jpg - metadata edited

Anonymous (anonymous@undisclosed.example.com) — 2013-01-21T22:28:00+00:00