Differences

This shows you the differences between two versions of the page.

--- installing_pirlp [2016/01/26 00:50] – [Hardware Required] k0kad
+++ installing_pirlp [2016/01/26 05:29] (current) – [Prerequisites and Disclaimer] k0kad
@@ Line 5: / Line 5: @@
 If you would like a ready-built and configured system, consider ordering one
-direct from IRLP at http://www.irlp.net/pi/
+direct from IRLP at http://irlp.net/order.html they also have prefabricated
+and all necessary parts to complete your PiRLP project.
 ----
@@ Line 15: / Line 16: @@
 Second thing - This is experimental and not supported. If it breaks something,
-the IRLP installs team can try to help, but we can not forsee all possible issues.
+the IRLP installs team can try to help, but we can not foresee all possible issues.
 IRLP will try to help where I can, but can not promise it will all work. If you
 are not able to troubleshoot the problem on your own, consider ordering a complete
-built and configured PiRLP node from the IRLP website: http://www.irlp.net/pi/
+built and configured PiRLP node from the IRLP website: http://irlp.net/order.html
 ====Hardware Required====
@@ Line 61: / Line 62: @@
 http://www.youtube.com/watch?v=1jOxalmll1o
 http://www.youtube.com/watch?v=G-1VxMMATh0
+If you are using a Pi2 or Pi B+ with a 40 pin header, you must cut pins 27 and 28 from the board in order to  fit the GPIO cable on.
+See: [[http://www.irlp.net/R_Pi/P2010014.JPG]]
+It also shows pin 4 removed - this is not required. It is used as a key for systems ordered from IRLP.
 ====Loading the Required Software====
-You will require the official Raspbian release from the Raspberry Pi Foundation:
+You will require the official Raspbian Jessie Lite release from the Raspberry Pi Foundation:
 http://www.raspberrypi.org/downloads
 (no support will be offered for this, besides what buttons to press) Follow the