User Tools

Site Tools


set_status_info

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

set_status_info [2014/11/12 04:32]
k0kad created
set_status_info [2014/11/12 05:13] (current)
k0kad
Line 4: Line 4:
  
 First you need to visit [[http://​www.irlp.net/​owners/​dbupdates.html]] and there you will find instructions on how to update the status page information. First you need to visit [[http://​www.irlp.net/​owners/​dbupdates.html]] and there you will find instructions on how to update the status page information.
 +
 +If your node is active and confirmed operational,​ you can update your node
 +information directly. This is performed by opening the webpage from the node itself, or
 +from a computer behind the same router. ​
 +
 +You will require the following info to update the page:
 +• Node ID number (should be supplied by installer)
 +
 +• Node Callsign (repeater/​remote base callsign)
 +
 +• Node owner contact information (name, callsign, email)
 +
 +• Node Town/ City, State/ Province, and Country
 +
 +• Node install date
 +
 +• Node information
 +
 +• Callsign of repeater or simplex node
 +
 +• Lat and Long of repeater or node in DECIMAL format dd.ddddd (not
 +dd.mm.ss)
 +
 +• Frequency of repeater or simplex node
 +
 +• Offset of repeater (if applicable)
 +
 +• PL tone or DCS code (numeric only ie 110. 9)
 +
 +• Club/​Repeater website address (optional)
 +
 +• There is also a field to provide access information for roamers. We
 +highly encourage node owners who have a non-standard access
 +procedure to provide access code information.
set_status_info.txt · Last modified: 2014/11/12 05:13 by k0kad