Internet Radio Linking Project (IRLP) Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Configuring the Identifier (Morse/Voice) ======
 
All IRLP nodes are programmed with a morse code / voice ID system by default. The configuration of the ID (known as Interval_id) is contained within the node environment file. 

You can edit the "environment" file (as user root) by typing:
  pico  /home/irlp/custom/environment
 
You can also edit this file from the IRLP Remote Ad
min system. 
The variables which can be edited include: 
USE_INTERVAL_ID 
-    Turns the ID system ON or OFF (YES or NO) 
VOICE_ID_FILE 
-    Voice ID wav file that is played if it exists. To
 make the system play the 
voice ID file, just place the selected file onto th
e node. 
ID_PTT 
-    Selects whether the PTT or AUX1 is used as a keyi
ng pin. For PiRLP this 
should be kept as AUX1. 
ID_INTERVAL 
-    Required ID interval in seconds (10 min = 600) 
ID_MIX 
-    Mixes the ID with regular node audio. For PiRLP n
odes this should be set 
to YES. 
MORSE_TEXT 
-    The morse text that is played for the ID. By defa
ult this is set to the 
callsign defined earlier in the file. Be sure to en
close the text you want 
played in quotes. 
MORSE_SPEED 
-    Options are SLOW (5wpm), MEDIUM (8wpm), FAST (15w
pm),  
FASTEST (30wpm) 
MORSE_PITCH 
-    Frequency in Hz that the morse is played at (300-
3000) 
MORSE_VOLUME 
-    % volume that the morse is played at (1-100)