Internet Radio Linking Project (IRLP) Wiki

Keeping the Radio in Amateur Radio

User Tools

Site Tools

Trace:
set_id

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

set_id [2016/01/26 01:26] – created k0kadset_id [2016/01/26 04:15] (current) – Page Reformat k0kad
Line 6: Line 6:
   pico  /home/irlp/custom/environment   pico  /home/irlp/custom/environment
    
-You can also edit this file from the IRLP Remote Ad +You can also edit this file from the IRLP Remote Admin system. 
-min system.  +The variables which can be edited include: 
-The variables which can be edited include:  +  * USE_INTERVAL_ID  - Turns the ID system ON or OFF (YES or NO)  
-USE_INTERVAL_ID  +  * VOICE_ID_FILE  - Voice ID wav file that is played if it exists. To make the system play the voice ID file, just place the selected file onto the node.  
--    Turns the ID system ON or OFF (YES or NO)  +  * ID_PTT  -  Selects whether the PTT or AUX1 is used as a keying pin. For PiRLP this should be kept as AUX1.  
-VOICE_ID_FILE  +  * ID_INTERVAL  -  Required ID interval in seconds (10 min = 600)  
--    Voice ID wav file that is played if it exists. To +  * ID_MIX  -  Mixes the ID with regular node audio. For PiRLP nodes this should be set to YES.  
- make the system play the  +  * MORSE_TEXT  -  The morse text that is played for the ID. By default this is set to the callsign defined earlier in the file. Be sure to enclose the text you want played in quotes.  
-voice ID file, just place the selected file onto th +  * MORSE_SPEED  -  Options are SLOW (5wpm), MEDIUM (8wpm), FAST (15wpm), FASTEST (30wpm)  
-e node.  +  * MORSE_PITCH  -  Frequency in Hz that the morse is played at (300-3000)  
-ID_PTT  +  * MORSE_VOLUME  -  % volume that the morse is played at (1-100) 
--    Selects whether the PTT or AUX1 is used as a keyi +
-ng pin. For PiRLP this  +
-should be kept as AUX1.  +
-ID_INTERVAL  +
--    Required ID interval in seconds (10 min = 600)  +
-ID_MIX  +
--    Mixes the ID with regular node audio. For PiRLP n +
-odes this should be set  +
-to YES.  +
-MORSE_TEXT  +
--    The morse text that is played for the ID. By defa +
-ult this is set to the  +
-callsign defined earlier in the file. Be sure to en +
-close the text you want  +
-played in quotes.  +
-MORSE_SPEED  +
--    Options are SLOW (5wpm), MEDIUM (8wpm), FAST (15w +
-pm),   +
-FASTEST (30wpm)  +
-MORSE_PITCH  +
--    Frequency in Hz that the morse is played at (300- +
-3000)  +
-MORSE_VOLUME  +
--    % volume that the morse is played at (1-100) +
set_id.txt · Last modified: 2016/01/26 04:15 by k0kad