Differences

This shows you the differences between two versions of the page.

--- set_status_info [2014/11/12 12:32] – created k0kad
+++ set_status_info [2014/11/12 13:13] (current) – k0kad
@@ Line 4: / Line 4: @@
 First you need to visit [[http://www.irlp.net/owners/dbupdates.html]] and there you will find instructions on how to update the status page information.
+If your node is active and confirmed operational, you can update your node
+information directly. This is performed by opening the webpage from the node itself, or
+from a computer behind the same router.
+You will require the following info to update the page:
+• Node ID number (should be supplied by installer)
+• Node Callsign (repeater/remote base callsign)
+• Node owner contact information (name, callsign, email)
+• Node Town/ City, State/ Province, and Country
+• Node install date
+• Node information
+• Callsign of repeater or simplex node
+• Lat and Long of repeater or node in DECIMAL format dd.ddddd (not
+dd.mm.ss)
+• Frequency of repeater or simplex node
+• Offset of repeater (if applicable)
+• PL tone or DCS code (numeric only ie 110. 9)
+• Club/Repeater website address (optional)
+• There is also a field to provide access information for roamers. We
+highly encourage node owners who have a non-standard access
+procedure to provide access code information.